My contact person
e-chains®, chainflex®, cables, harnessed systems readychain®

+381 11 63 098 17
Photo
dry-tech® bearing technology

+381 11 63 098 17
Photo

triflex® RSE – linear retraction system for TRC, TRE, TRCF

Retraction system for welding, riveting and assembly robots.

As robotic technology become more complex, the demands on the energy management systems are increasing. More and more often, not only electrical and pneumatic cables but also feed hoses for bolts, rivets and screws have to be routed on production robots. Since these hoses cannot cope with a small bend radius, the new triflex® RSE relies on very simple linear retraction system without deflection and no loops.

TRE.60-100

Linear movement without deflection or loops on the robot.

The purpose of the triflex® RSE retraction system is to hold the e-chain® to the robotic arm as closely as possible - this prevents the e-chain® from intefering with the robot's movements. The triflex® RSE is a particularly lightweight and cost-effective retraction system
 

  • Available for triflex® sizes 40–125
  • Shorter cable lengths, because there is no deflection
  • Space-saving design
  • Fewer deflection points, higher process reliability also for LLK and supply hoses

Typical application areas: Industrial robots with complex motion sequences, for laser light cables (LLCs), corrugated tubes, and supply hoses

The RSE retraction system consists of the following components:

1

drylin® linear guide with carriage

2

Elastic cord or tension spring for retraction

3

Mounting plates for flexible connection to a wide range of robot types

4

Mounting bracket without strain relief of the corresponding e-chain® size

5

Smooth feed-through of the corresponding e-chain® size

TRE.60100

The easiest and fastest way to the right retraction system

Robot equipment configurator

  • Almost all robot types from Kuka, Fanuc, ABB and Yaskawa available for selection
  • A complete package configured with just a few clicks
  • Parts lists online
  • Always adaptable
  • Can be ordered online

go to the configurator

triflex® RSE product range – linear retraction system

Part no. e-chain series that goes with it triflex® R
variants
Price
ready for shipping in 48 - 72 hours TR.RSE.40 TRC.40.058.0 | TRE.40.058.0.B TRE, TRC 640.98 USD Add to shopping cart
ready for shipping in 48 - 72 hours TR.RSE.50 TRC.50.080.0 | TRE.50.080.0.B TRE, TRC 671.04 USD Add to shopping cart
ready for shipping in 48 - 72 hours TR.RSEC.60 TRE.60.087.0.B | TRC.60.087.0 TRE, TRC 633.94 USD Add to shopping cart
ready for shipping in 48 - 72 hours TR.RSE.60 TRE.60.087.0.B | TRC.60.087.0 TRE, TRC 1,017.66 USD Add to shopping cart
ready for shipping in 48 - 72 hours TR.RSE.65 TRCF.65.100.0 | TRCF.65.200.0 TRE, TRC 1,057.32 USD Add to shopping cart
ready for shipping in 48 - 72 hours TR.RSE.70 TRE.70.110.0.B | TRC.70.110.0 TRE, TRC 1,021.66 USD Add to shopping cart
ready for shipping in 48 - 72 hours TR.RSE.85 TRE.85.135.0.B | TRC.85.135.0 | TRCF.85.135.0 TRE, TRC, TRCF 1,038.40 USD Add to shopping cart
ready for shipping in 48 - 72 hours TR.RSE.85.240 TRCF.85.240.0 TRCF 1,075.30 USD Add to shopping cart
ready for shipping in 48 - 72 hours TR.RSE.100 TRE.100.145.0.B | TRE.100.145.0.C | TRC.100.145.0 | TRCF.100.145.0 TRE, TRC, TRCF 1,125.82 USD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

triflex® TRC and TRCF e-chain® product range for the RSE system:

Please note that the length of the e-chain® in the RSE retraction system should be at least 800mm.


Part no. Bi1
in mm
Bi2
in mm
BA
in mm
R
in mm
d1
in mm
d2
in mm
Pitch
in mm
Price
per chain link
ready for shipping in 24 - 48 hours TRC.60.087.0 22.5 19.5 65 87 20.5 17.5 20.4 41.51 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRC.70.110.0 28 24 81 110 26 22 25.6 50.08 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRC.85.135.0 33 28 94.5 135 31 26 30.6 53.56 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRC.100.145.0 37.5 32.5 108 145 35.5 30.5 34.5 57.41 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRC.125.182.0 43.3 43.3 135 182 41 41 44.1 74.04 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRCF.65.100.0 22.3 0 70.2 100 20 0 23.1 63.96 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRCF.65.200.0 22.3 0 70.2 200 20 0 23.1 72.20 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRCF.85.135.0 30 0 94.5 135 28 0 30.6 69.74 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRCF.85.240.0 30 0 94.5 240 28 0 30.6 69.74 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRCF.100.145.0 34.3 0 108 145 32 0 34.5 75.00 USD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
PDF PDF
Quote request Quote request
myCatalog myCatalog

triflex® TRE e-chain® product range for the RSE system:

Please note that the length of the e-chain® in the RSE retraction system should be at least 800mm.


Part no. Bi1
in mm
Bi2
in mm
BA
in mm
R
in mm
d1
in mm
d2
in mm
Pitch
in mm
Price
ready for shipping in 24 - 48 hours TRE.60.087.0.B 22.5 19.5 65 87 20.5 17.5 20.4 44.57 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRE.60.087.0 22.5 19.5 65 87 20.5 17.5 20.4 44.57 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRE.70.110.0.B 28 24 81 110 26 22 25.6 54.26 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRE.70.110.0 28 24 81 110 26 22 25.6 54.26 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRE.85.135.0.B 33 28 94.5 135 31 26 30.6 58.86 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRE.85.135.0 33 28 94.5 135 31 26 30.6 58.86 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRE.100.145.0.B 37.5 32.5 108 145 35.5 30.5 34.5 62.07 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRE.100.145.0.C 37.5 32.5 108 145 35.5 30.5 34.5 72.93 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRE.100.145.0 37.5 32.5 108 145 35.5 30.5 34.5 62.07 USD Add to shopping cart
ready for shipping in 24 - 48 hours TRE.125.182.0 43.3 43.3 135 182 43 43 44.1 79.99 USD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog
RSE with numbers

Calculating the overall chain length | RSE e-chains®

ø
index
R [mm]Dim. 2
[mm]
30.--
40.058390
50.080390
60.087750
65100750
70.110750
85.135750
85.
(R 240)
240750
100.145750
125.182750


Total chain length calculation: Dimension 1 + 2 + 3 
You can determine Dimensions 1 and 3 yourself according to your application or robot type.

Complete your application with the right accessories

Protectors provide additional protection from wear

Clip protector

Clip protector

Bolted protector

Clip protector with screw connection

triflex® R lip protector

Part No. Width index Outer diameter Width
ready for shipping in 24 - 48 hours TR.40.30 40 55 27 22.64 USD Add to shopping cart
ready for shipping in 24 - 48 hours TR.60.30 60 80 40 23.39 USD Add to shopping cart
ready for shipping in 24 - 48 hours TR.70.30 70 102 50 36.77 USD Add to shopping cart
ready for shipping in 24 - 48 hours TR.85.30 85 118 59 38.05 USD Add to shopping cart
ready for shipping in 24 - 48 hours TR.100.30 100 133 67 35.58 USD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

triflex® R clip protector with screw connection

Part No. Width index Outer diameter Width
ready for shipping in 24 - 48 hours TR.40.10 40 55 27 18.86 USD Add to shopping cart
ready for shipping in 24 - 48 hours TR.50.10 50 69 34 50.84 USD Add to shopping cart
ready for shipping in 24 - 48 hours TR.60.10 60 80 40 20.44 USD Add to shopping cart
ready for shipping in 24 - 48 hours TR.65.10 65 88 44 61.11 USD Add to shopping cart
ready for shipping in 24 - 48 hours TR.70.10 70 102 50 30.65 USD Add to shopping cart
ready for shipping in 24 - 48 hours TR.85.10 85 118 59 30.52 USD Add to shopping cart
ready for shipping in 24 - 48 hours TR.85.240.10 85 120 63 132.27 USD Add to shopping cart
ready for shipping in 24 - 48 hours TR.100.10 100 133 67 29.66 USD Add to shopping cart
ready for shipping in 72 hours TR.125.10 125 170 82 370.92 USD Add to shopping cart
More about selected part:
3D-CAD 3D-CAD
Sample request Sample request
Quote request Quote request
myCatalog myCatalog

ready for shipping in 24 - 48 hours
ready for shipping in 48 - 72 hours
ready for shipping in 72 hours
The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.