My contact person
e-chains®, chainflex®, cables, harnessed systems readychain®

+381 11 63 098 17
Photo
dry-tech® bearing technology

+381 11 63 098 17
Photo

Configurators for triflex® R energy chain

Quick Robot

The configurator for the complete robotic system

The configurator offers the possibility to design a complete energy supply package from axis 2 to axis 6. Possible for the following manufacturers: 

  • ABB
  • Fanuc
  • Kuka
  • Yaskawa
  • Universal Robots
  • Techman Robot

Start the configurator

Interior separation for all triflex R series


When choosing the right triflex R size, make sure that a space reserve is planned for all electrical, pneumatic and media cables. This is necessary to compensate for forces that occur due to relative movements between the e-chain® and the cables as well as between the cables themselves. Cables must be installed with sufficient clearance/air.The following value can be assumed as a rough rule of thumb: the sum of the cable cross sections should not exceed 60% of the effective cross section; in addition, a space requirement of 10% or at least 1mm to the next cable or e-chain® must be observed. The quickest and easiest solution to find the correct triflex R filling is the interior separation configurator, where all triflex R series are available

Start the configurator

Maximum filling 

Well-filled triflex R

Consulting

I would be happy to answer your questions personally

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.