iglidur® P210, sleeve bearing, mm - P210SM

iglidur® P210 | Specialist for pivoting, rolling applications and more - Good friction and wear values on almost any shaft
iglidur® P210 bearings provide the user with versatile all-round bearings that have an above-average service life, especially in pivoting applications with medium loads of up to 20MPa. This versatile material has already proven its worth in many customer-specific solutions and as a bar stock material. Clip-on or pre-loaded designs as well as vehicle interior applications are possible.

Typical application areas

Agricultural engineering
Mechanical engineering
Furniture / industrial design
Textile industry

Here you will find further possible applications:
Industry solutions
 

When to use it? When a universal plain bearing for use in a wet environment is required When a wear-resistant plain bearing for pivoting applications at medium loads is required When edge loads and shocks occur When the surface pressure of iglidur® J is insufficient

When not to use it? When an universal bearing with the greatest possible variety of dimensions is sought iglidur® G, sleeve bearing, mm When a bearing is required for very highly loaded pivoting applications iglidur® Q, sleeve bearing, mm iglidur® Q2, sleeve bearing, mm When temperatures greater than +100°C occur iglidur® G, sleeve bearing, mm iglidur® J350, sleeve bearing, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining