iglidur® J350, valjkasti ležaj, mm - J350SM

iglidur® J350 | Endurance runner with high dimensional stability at temperature - applicable with many shafts and load collectives
A superior plain bearing for rotational applications - and that on many different steel shafts: In iglidur® J350 flanged bearings, the service life can often be multiplied at loads between 2MPa and 50MPa. In addition, the high temperature resistance makes it a very versatile material.

Typical application areas

Vending machinery
Automotive
Glass industry
Mechanical engineering

Here you will find further possible applications:
Industry solutions
 

When to use it? When a wear-resistant bearing for rotational movement at medium and high loads is required When a cost-effective bearing is required for use at high temperatures When press-fit up to +150°C is necessary When high wear resistance is required at high loads When the bearing is exposed to shock loading

When not to use it? At temperatures above +180°C continuously iglidur® X, sleeve bearing, mm When the lowest friction is important iglidur® J, sleeve bearing, mm When a favourable low-friction bearing is sought iglidur® D, sleeve bearing, mm iglidur® R, sleeve bearing, mm For high circumferential speeds iglidur® J, sleeve bearing, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining