iglidur® TX1, valjkasti ležaj, mm - TX1SM

igutex® TX1 | The high load bearing up to 200MPa
 

• Up to 200MPa static and 140MPa dynamic
• Wear-resistant and dimensionally stable
• Good media-resistance
• Lubrication and maintenance-free
• Standard range from stock

igutex® TX1 plain bearings stand for very high load-bearing capacity despite high radial loads combined with good abrasion resistance. The special design ensures high dimensional stability thanks to the long fibre winding while solid lubricants allow for operation without lubrication or maintenance. High resistance to dirt and media completes the parts' specifications.

Typical application areas

Agricultural engineering
Construction machinery
Heavy machinery/plant engineering

You can find further application areas here:
Industry solutions

 

When to use it? If very high static loads occur permanently For highly loaded pivoting movements When temperature resistance and media resistance are required in addition to very high load capacity

When not to use it? When loads well below 100MPa occur iglidur® G, sleeve bearing, mm iglidur® Q2, sleeve bearing, mm iglidur® Q, sleeve bearing, mm For rotational movements in continuous operation iglidur® W300, sleeve bearing, mm iglidur® Z, sleeve bearing, mm iglidur® G, sleeve bearing, mm For high-temperature applications with medium load iglidur® X, sleeve bearing, mm iglidur® J350, sleeve bearing, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of igutex® plain bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
igutex® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining