1 iz 2
igus-icon-lupe
igus-three-dimensional-model
- Broj dela: L500SM-0304-03
- Materijal: iglidur® L500
- Oblik: Cilindrični ležajevi
- Dimenzije:
- d1 3 mm
- d2 4.5 mm
- b1 3 mm
- Više iglidur® L500 delova
- Metod proizvodnje: Injekciono oblikovanje
- Radni vek:
- Dobra otpornost na habanje na srednjim temperaturama
- Odlična otpornost na habanje pri visokim temperaturama
- Pogodan za izuzetno velike brzine
- Izvrsni koeficijent trenja
- Niska apsorpcija vlage
- Dobra otpornost na habanje pod vodom
- Vrlo visoka otpornost na medije
- Otporan na prljavštinu i prašinu
iglidur® L500 | For extreme rotational speeds
iglidur® L500 is a plain bearing material for high speeds, fast sliding movements with low loads. Due to the low thermal expansion and low moisture absorption, bearings can be manufactured with very little clearance. Applications featuring these advantages are fans, small motors, fast-running sensors or the magnet technology.
Typical application areas
Automotive
Mechanical engineering
Here you will find further possible applications:
Industry solutions
Use our filter options to find the suitable product
Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure
Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining
iglidur® L500 is a plain bearing material for high speeds, fast sliding movements with low loads. Due to the low thermal expansion and low moisture absorption, bearings can be manufactured with very little clearance. Applications featuring these advantages are fans, small motors, fast-running sensors or the magnet technology.
Typical application areas
Automotive
Mechanical engineering
Here you will find further possible applications:
Industry solutions
When to use it?
| When not to use it?
|
Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure
Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining
Niste sigurni da li odgovara?