iglidur® A200, valjkasti ležaj, mm - A200SM

iglidur® A200 | FDA-compliant for low speeds
Plain bearings made of iglidur® A200 are suitable for use with direct food contact. They are ideal for bearing points on machines in the food industry, medical equipment manufacturing, small household appliances etc. To ensure food compatibility, iglidur® A200 plain bearings contain no solid lubricants, so that their thermoplastic composition is specifically designed for abrasion resistance. Additionally, iglidur® A200 is characterised by its ability to embed dirt and by its quiet operation.

Typical application areas

Food industry

You can find further fields of application here:
Industry solutions

 

When to use it? Suitable for contact with food When a low noise level is required When dirt needs to become embedded When FDA compliance is required

When not to use it? When only the highest wear resistance is required iglidur® W300, sleeve bearing, mm When temperatures permanently higher than +80°C occur iglidur® A350, sleeve bearing, mm iglidur® A500, sleeve bearing, mm When an inexpensive universal bearing is sought iglidur® G, sleeve bearing, mm If the application is to take place in a wet environment iglidur® A180, sleeve bearing, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: the thicker the bearings, the greater the bearing clearance must be.
Test procedure
Installation
iglidur® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining