iglidur® M210, sleeve bearing, mm - M210SM

iglidur® M210 | Thick-walled for medium loads
iglidur M210 was specially developed for use in the medium load range with swivelling loads. In addition, care was taken during development to be able to use the material particularly well for injection moulded thick-walled bearings. This makes iglidur M210 particularly suitable for applications in which thick-walled bearings are to be used or replaced that are also as robust as possible. 

Typical application areas
Agricultural engineering
Mechanical engineering
Furniture/Industrial design
Textile industry

Here you will find further possible applications:
Industry solutions

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. The moisture absorption and thermal expansion are decisive for the material. Bearings with low moisture absorption can be installed with small bearing clearance. The following applies to the wall thickness: the thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® plain bearings are press-fit bearings. The inner diameter is set with the corresponding tolerance only after pressing into the housing bore. The press-fit interference can be up to 2% of the inner diameter. This ensures a secure press fit of the bearings. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining