iglidur® G1, valjkasti ležaj, mm - G1SM

iglidur® G1 | The new lubrication-free standard
With iglidur® G1 we offer a wear-resistant and versatile material for a wide range of applications. Recommended for applications with medium to high loads at medium speeds. Even at elevated temperatures up to 180°C, iglidur® G1 is dimensionally stable, wear-resistant and offers very low moisture absorption. Thus iglidur® G1 is suitable for a multitude of different applications and represents an all-rounder with very good running performance.

Typical application areas
AutomotiveMechanical engineeringFurniture / industrial design
Sport, fitness and rehab

Here you will find further possible applications:
Industry solutions
 

When to use it? When an economical all-round performance bearing is required For low to average surface speeds When the bearing needs to run on different shaft materials For pivoting and rotational movements

When not to use it? When mechanical rework is required iglidur® M250, sleeve bearing, mm When only the highest wear resistance is required iglidur® W300, sleeve bearing, mm When universal chemical resistance is required iglidur® X, sleeve bearing, mm If temperatures are permanently greater than +180°C iglidur® H, sleeve bearing, mm iglidur® X, sleeve bearing, mm iglidur® H370, sleeve bearing, mm For use under water iglidur® H370, sleeve bearing, mm

Use our filter options to find the suitable product


Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining