iglidur® G, valjkasti ležaj, mm - GSM

iglidur® G | The all-rounder
The widest range of different requirements is covered by iglidur® G plain bearings. Therefore, the material is rightly called universal. Applications with medium to high loads, medium surface speeds and medium temperatures are recommended. iglidur® G is the decathlete among the iglidur® materials. It performs exceedingly well in all technical disciplines and is the classic all-rounder, primarily with respect to the overall mechanical, thermal and tribological specifications.

Typical application areas

Agricultural engineering
Automotive
Construction machinery
Mechanical Engineering
Sports, fitness & rehab
Furniture / Industrial design

Here you will find further possible applications:
Industry solutions
 

When to use it? When an economical all-round performance bearing is required For low to average surface speeds When the bearing needs to run on different shaft materials For pivoting and rotational movements

When not to use it? When mechanical rework is required iglidur® M250, sleeve bearing, mm When only the highest wear resistance is required iglidur® W300, sleeve bearing, mm When universal chemical resistance is required iglidur® X, sleeve bearing, mm If temperatures are permanently higher than +130°C iglidur® H, sleeve bearing, mm iglidur® X, sleeve bearing, mm iglidur® H370, sleeve bearing, mm For use under water iglidur® H370, sleeve bearing, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: the thicker the bearings, the greater the bearing clearance must be.
Test procedure
Installation
iglidur® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining