iglidur® HSD350, valjkasti ležaj, mm - HSD350SM

Svestrani materijal za sterilizaciju parom

iglidur® HSD350, valjkasti ležaj, mm - HSD350SM
iglidur® HSD350, valjkasti ležaj, mm - HSD350SM drawing
1 iz 2
iglidur® HSD350, valjkasti ležaj, mm - HSD350SM
iglidur® HSD350, valjkasti ležaj, mm - HSD350SM drawing
igus-icon-lupe
igus-three-dimensional-model
  • Broj dela: HSD350SM-0608-06
  • Materijal: iglidur® HSD350
  • Oblik: Cilindrični ležajevi
  • Dimenzije:
    • d1 6 mm
    • d2 8 mm
    • b1 6 mm
  • Više iglidur® HSD350 delova
  • Metod proizvodnje: Injekciono oblikovanje
  • Radni vek:
Svojstva materijala:
  • Dobra otpornost na habanje na sobnoj temperaturi
  • Dobra otpornost na habanje na srednjim temperaturama
  • Izvrsni koeficijent trenja
  • Vrlo visoka otpornost na medije
  • Otpornost na ivice pritiska
  • Otporan na udarce i padove
  • Pogodno za sterilizaciju parom
iglidur® HSD350 | Media-resistant and hygienic at low cost

The new material enables continuous hygienic use, including regular sterilisation, at an excellent price/performance ratio.

Typical application areas

Fluid technology
Medical technology


Here you will find further possible applications:
Industry solutions

 
When to use it?
  • If the bearing point is regularly sterilised with hot steam
  • When a low-cost material is required at the same time
  • When good chemical resistance is required
  • Low humidity absorption
When not to use it?
Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining
Niste sigurni da li odgovara?