iglidur® G | The general purpose bearing - Over 650 sizes available from stock
- High wear resistance
- Resistance to dust and dirt
- Cost-effective
- Lubrication-free and maintenance-free
iglidur® G plain bearings cover an extremely wide range of different requirements - they are truly "all-round". The material is ideal for universal applications, a truly "all-round". Typical applications include medium to high loads, medium surface speeds and medium temperatures. iglidur® G is the decathlete among iglidur® materials. It performs exceedingly well in all technical disciplines and is the classic all-rounder, primarily with respect to the overall general, mechanical, thermal and tribological specifications.
Typical application areas AgricultureAutomotiveConstruction machineryMachine toolsFitness and sports Further applications can be found here:
Industry solutions When to use it?- When an economical all-round performance bearing is required
- For low to average surface speeds
- When the bearing needs to run on different shaft materials
- For pivoting and rotational movements
| When not to use it?- When mechanical rework of the wall surface is necessary
iglidur® M250, sleeve bearing with flange, mm - When the highest possible wear resistance is required
iglidur® W300, sleeve bearing with flange, mm - When universal resistance to chemicals is needed
iglidur® X, sleeve bearing with flange, mm - If temperatures are constantly higher than +130°C
iglidur® H, sleeve bearing with flange, mm iglidur® X, sleeve bearing with flange, mm iglidur® H370, sleeve bearing with flange, mm - For underwater use
iglidur® H370, sleeve bearing with flange, mm
|
Use our filter options to find the suitable product Tolerances and measuring systemThe installation height and tolerances of iglidur® plain bearings are dependent on the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule of thumb for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods Assemblyiglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting into the correctly toleranced housing hole. The press-fit interference can be up to 2% of the inner diameter. This ensures that the bearing is securely press-fitted. Axial or radial movement in the housing are also prevented in this way.
iglidur® - assembling, gluing, machining
Certificates and standards